• Products

    Acrylic Wallputty


FLIXO Acrylic Wall Putty is a ready to use water based wall putty. It is designed for filling and smoothening out cracks and dents on the plastered wall or similar interior surfaces. Its Acrylic binding gives a very strong and durable foundation which brings out the better-quality performance of expensive finished Paints in terms of permanence and appearance.


Ready to use

Easy Application

Enhanced breathability and lesser porosity.

Better alkali resistance

Quick Drying


FLIXO Acrylic Wall Putty is made for Interior use only. It is intended for filling of dents and roughness and labeling on plastered as well as primed wall or similar interior surfaces. It can be applied on plastered surfaces, asbestos sheets, concrete, brickwork etc.


New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces. Ensure the surface is clean, dry and free from all defective or poorly adhering material, dirt, grease, Wax etc. Remove all loose or poorly adhering materials by rubbing down using emery paper and Thereafter wipe clean.

Drying Time:Surface Dry: 30 minutes.

(@30± 2C & RH 60 ±5%)

Overcoat ability:

4-6 hrs (Over Water Based Primer)

8-10 hrs (Over Solvent Based Primer)

Thinning Solvent: Potable Water (If needed)


1 COAT - 34-42 sq.ft/kg

2 COAT - 20-32 sq.ft/kg

*Actual Coverage may vary depending on method and condition of application, surface roughness.


a. Drying time: Surface dry time 30 min

b. Sheen levels/Gloss Lavel: Matt

c. Flash point: NA

d. Stability of thinned paint: To be used within 24 hours


Keep out of reach of children and away from food stuff. Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application. Do not over-thin.