FLIXO PAINTS WALL PUTTY IS AN EXCELLENT UNDERCOAT WITH A SUPERIOR COMBINATION OF FILLING AND SMOOTHNING ABILITY TO THE SURFACE FOR A LONGER LIFE OF EXPENSIVE TOP COAT.
PERFORMANCE FEATURES & BENEFITS
Excellent Filling Capacity: Fills up to an optimum DFT in 1 coat without cracking or shrinking.
Skim Coat Application: Can be applied with a thickness of less than 1mm also.
Optimal Pot Life: Upto 60-90 minutes, resulting no material wastage and a solo application option.
Water Factor: Good Workability, Excellent Trowelability
Wet Mortar Properties: Outstanding Flo,No dry or wet Chalking ( 28 Days)
Application Benefits: Leaves no Air Pocket or Pin Holes.Excellent Smooth and Shiny Finish.
All types of interior/Exterior plasters, walls and concret
New masonry surfaces must be allowed to cure completely for best results. It is recommended to allow 28 days as curing time for new masonry surfaces.
Ensure the surface is completely free from all dirt, loosely held plaster, powdery residue, oil grease or any other contamination. Any previous growth of fungus, algae or moss needs to be removed thoroughly by vigorous wire brushing and cleaning with water.
There will be Variation on actual coverage according to the porosity and texture of the surface. However When mixed to normal consistency, approximate covering capacity is as follows.
Surface 2 coat finish
@ 1mm thickness:10-12 Sqft
**Actual coverage may vary from the quoted coverage dueto factors such as application condition, surface preparation, porosity and the filling.
|Compresive Strenth -28 Days||>8|
|Adhesion Strenth -28 days||>0.8|
|Water Retentivity %||>98|
|Water Requirement by Volume||36% - 38%|
|Fresh Moter Density||1.7±0.5|
|Drying time:||Surface dry time 45-60 minutes Depending on surface condition|
|Flash Point:||100% Water base. Hence N/A|
|Stability of mixed putty:||To be used within 60-90 minutes|
|Gloss Level||Matt and Smooth|
|Pot Life of Thinned Putty||60-90Min.|
|Shelf Life||1 year from the mfg.date when stored in normal Temp.|
|Tools required||Putty knives/Trowel|
|Solvent required||Potable Water|
|Number of Coat required||2 Coat Min.|
|PROCESS||APPLICATION||SOLVENT||MIXING RATIO BY WEIGHT||RECOATING PERIOD|
|STEP 1||Sanding||SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN|
|STEP 2||FLIXO PAINTS WALL PUTTY 1st Coat||Potable Water||35 to 40%||6-8 hrs|
|STEP 3||FLIXO PAINTS WALL PUTTY 2nd Coat||Potable Water||35 to 40%||8-10 Hrs.|
|STEP 4||Sanding||LIGHT SAND THE SURFACE WITH SAND PAPER 220 AND WIPE CLEAN|
|STEP 5||Primer and Top Coat||APPLY A COAT OF PRIMER FOLLOWED BY 2-3 COATS OF Top Coat|
HANDLING & STORAGE
Keep sacks airtight during handling and storage to avoid loss of material. Store FLIXO PAINTS WALL PUTTY in a cool dry place and also protect it from extreme climatic conditions during storage, in transit and at site.
Ensure the material is mixed homogenously with water and used within 60 minutes of mixing. Do not sand the material vigorously with sand paper otherwise it will reduce the strength of the material.
Keep out of reach of children and away from food and drinks. May be harmful if swallowed. In case of ingestion seek immediate medical attention. Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation. No added Lead, Mercury or Chromium compounds
20Kg and 40 Kg PP Laminated Multilayered Bag.